RV, van & overland
12 V and 48 V systems for camper conversions, with flexible panels that follow a curved roof.
5.12 kWh
Rated capacity
2.5 mm
Modules installed
25 yr
System warranty
Overview
A camper build has three constraints: roof area, weight and the alternator. We size the array to the roof, the battery to the nightly load, and the DC-DC charger to what the vehicle can actually spare.
The kit uses SM-FLEX panels bonded to the roof curve, a 48 V 5.12 kWh stack in the rear garage and a 60 A DC-DC charger. Shore power and solar share one MPPT input.
For rental fleets we add a shunt and a simple display so the customer can see remaining hours without an app.
Highlights
- Panels bonded to curved roofs, no rails
- 48 V stack keeps cable sizes small
- DC-DC charger matched to alternator
- Rental-friendly state-of-charge display
Related products
All products
Best sellerSM-STACK 5.12
A 5.12 kWh module that stacks to 25.6 kWh on one base, with front-access terminals and a shared BMS.
SM-WALL 5.2 / 10.5 / 16
Three wall-mounted capacities in a 180 mm cabinet, with a round status display and floor-stand feet in the box.
SM-PPS 500 / 1000
A 500 W / 1 kWh site station with a 1 kW / 2 kWh sibling, 300 W MPPT input and pure sine output.
All solutions