Marine & offshore
Flexible arrays and sealed packs for buoys, uncrewed vessels and yacht decks — salt-tested, low-profile.
3 weeks
Autonomy
IP67
Uptime target
12 kg
Modules installed
Overview
Marine work punishes anything with a frame and a fan. Our answer is a bonded flexible array, a sealed LFP pack and a passive heat path into the hull or mast.
On buoys, the panel follows the lid curvature and the pack sits in a dry compartment with a breather. A 200 W array and 1.6 kWh pack carry a 6 W payload through three weeks of grey weather.
For uncrewed vessels, weight aloft matters more than total capacity: we trade kWh for a lower centre of gravity and a shorter mast shadow.
Highlights
- Bonded flexible arrays, no frame or fan
- Sealed packs with breather valve
- Salt-spray tested connectors
- Weight aloft kept below 12 kg
Related products
All products
Best sellerSM-STACK 5.12
A 5.12 kWh module that stacks to 25.6 kWh on one base, with front-access terminals and a shared BMS.
SM-WALL 5.2 / 10.5 / 16
Three wall-mounted capacities in a 180 mm cabinet, with a round status display and floor-stand feet in the box.
SM-PPS 500 / 1000
A 500 W / 1 kWh site station with a 1 kW / 2 kWh sibling, 300 W MPPT input and pure sine output.
All solutions